Chrysler 300 2018 Owner'S Manual Download Page 427

Page: 427 / 485

Safety & Driving Assistance
After pressing the “Safety & Driving Assistance” button on

the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Forward Collision

Warning On/Off— If

Equipped

Off

NOTE:
Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in

front of you.

The FCW system state is kept in memory from one ignition cycle to the next. If the system is turned OFF, it will re-

main off when the vehicle is restarted.

Forward Collision

Warning — If

Equipped

Near

Far

NOTE:
The Front Collision Warning (FCW) feature provides an audible and/or visual warning to potential forward colli-

sions. The feature can be can be set to “Far”, or set to “Near”. The default status of FCW is the “Far” setting. This

means the system will warn you of a possible collision with the vehicle in front of you when you are farther away.

This gives you the most reaction time. To change the setting for more dynamic driving, select the “Near” setting. This

warns you of a possible collision when you are much closer to the vehicle in front of you.

MULTIMEDIA

425

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands

Chrysler 300 2018, Owner'S Manual

Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands