Chrysler 300 2018 Owner'S Manual Download Page 386 | Manualshive

Page: 386 / 485

background image

Keep dismounted tires in a cool, dry place with as little

exposure to light as possible. Protect tires from contact with

oil, grease, and gasoline.
Replacement Tires
The tires on your new vehicle provide a balance of many

characteristics. They should be inspected regularly for

wear and correct cold tire inflation pressures. The manu-

facturer strongly recommends that you use tires equivalent

to the originals in size, quality and performance when

replacement is needed. Refer to the paragraph on “Tread

Wear Indicators” in this section. Refer to the Tire and

Loading Information placard or the Vehicle Certification

Label for the size designation of your tire. The Load Index

and Speed Symbol for your tire will be found on the

original equipment tire sidewall.
See the Tire Sizing Chart example found in the “Tire Safety

Information” section of this manual for more information

relating to the Load Index and Speed Symbol of a tire.
It is recommended to replace the two front tires or two rear

tires as a pair. Replacing just one tire can seriously affect

your vehicle’s handling. If you ever replace a wheel, make

sure that the wheel’s specifications match those of the

original wheels.

It is recommended you contact your authorized tire dealer

or original equipment dealer with any questions you may

have on tire specifications or capability. Failure to use

equivalent replacement tires may adversely affect the

safety, handling, and ride of your vehicle.

WARNING!

•

Do not use a tire, wheel size, load rating, or speed
rating other than that specified for your vehicle.
Some combinations of unapproved tires and wheels
may change suspension dimensions and perfor-
mance characteristics, resulting in changes to steer-
ing, handling, and braking of your vehicle. This can
cause unpredictable handling and stress to steering
and suspension components. You could lose control
and have a collision resulting in serious injury or
death. Use only the tire and wheel sizes with load
ratings approved for your vehicle.

•

Never use a tire with a smaller load index or capacity,
other than what was originally equipped on your
vehicle. Using a tire with a smaller load index could
result in tire overloading and failure. You could lose
control and have a collision.

(Continued)

384

SERVICING AND MAINTENANCE

«
...
384
385
386
387
388
...
»

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2018

Brand: Camcar Pages: 2

Brand: Jeep Pages: 6

Brand: DEFA Pages: 9

Slim Line LED Light Grille Kit

Brand: rough country Pages: 8

YARIS LIFTBACK 2009

Brand: Toyota Pages: 13

Brand: Westfalia Pages: 71

Dodge Charger TufBox

Brand: TUFLOC Pages: 6

Brand: AC Schnitzer Pages: 16

Brand: Chevrolet Pages: 412

Brand: Thule Pages: 8

Brand: SAN HIMA Pages: 10

Brand: Yakima Pages: 13

Brand: ULTIMATE SPEED Pages: 10

Brand: Edelbrock Pages: 4

Hitch-Haul 30110315

Brand: Masterbuilt Pages: 2

Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600

Brand: Ecco Pages: 2

Sportsman 40-0125

Brand: Westin Pages: 2

Brand: Comelit Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands