Chrysler 300 2018 Owner'S Manual Download Page 122

Page: 122 / 485

turn off the message temporarily, push and release the OK

or arrow buttons. To reset the oil change indicator system

(after performing the scheduled maintenance), refer to the

following procedure.
Vehicles Equipped With Keyless Enter-N-Go — Ignition
Use the steering wheel instrument cluster display controls

for the following procedure(s):
1. Without pressing the brake pedal, push the ENGINE

START/STOP button and place the ignition in the

ON/RUN position (do not start the engine).

2. Push and release the down arrow button to scroll

downward through the main menu to “Vehicle Info.”

3. Push and release the right arrow button to access the

”Oil Life” screen.

4. Push and hold the OK button to reset oil life. If

conditions are met, the gauge and numeric display will

update to show 100%. If conditions are not met a popup

message of

⬙

To reset oil life engine must be off with

ignition in run

⬙

will be displayed (for five seconds), and

the user will remain at the Oil Life screen.

5. Push and release the up or down arrow button to exit

the submenu screen.

NOTE:

If the indicator message illuminates when you

start the vehicle, the oil change indicator system did not

reset. If necessary, repeat this procedure.
Secondary Method Of Resetting Engine Oil Life

1. Without pressing the brake pedal, push the ENGINE

START/STOP button and place the ignition to the

ON/RUN position (do not start the engine).

2. Fully press the accelerator pedal, slowly, three times

within ten seconds.

3. Without pushing the brake pedal, push the ENGINE

START/STOP button once to return the ignition to the

OFF/LOCK position.

NOTE:

If the indicator message illuminates when you start

the vehicle, the oil change indicator system did not reset. If

necessary, repeat this procedure.

Instrument Cluster Display Selectable Menu Items

Push and release the up or down arrow button until the

desired Selectable Menu item is displayed in the instru-

ment cluster display.
Follow the Menu or submenu prompts as desired.

120

GETTING TO KNOW YOUR INSTRUMENT PANEL

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands

Chrysler 300 2018, Owner'S Manual

Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands