Chrysler 300 2018 Owner'S Manual Download Page 287

Page: 287 / 485

Trailer Hitch Classification Definitions

Class IV - Extra Heavy Duty

10,000 lbs (4,535 kg)

Refer to the “Trailer Towing Weights (Maximum Trailer Weight Ratings)” chart for the Maximum Gross Trailer Weight

(GTW) towable for your given drivetrain.
All trailer hitches should be professionally installed on your vehicle.

Trailer Towing Weights (Maximum Trailer Weight
Ratings)

Engine/Transmission

Frontal Area

Max. GTW

(Gross Trailer Weight)

Max. Tongue Weight

(See Note)

3.6L Automatic

22 sq ft (2.04 sq m)

1,000 lbs (454 kg)

100 lbs (45 kg)

5.7L Automatic

32 sq ft (2.97 sq m)

1,000 lbs (454 kg)

100 lbs (45 kg)

Refer to local laws for maximum trailer towing speeds.

NOTE:

The trailer tongue weight must be considered as

part of the combined weight of occupants and cargo, and it

should never exceed the weight referenced on the “Tire and

Loading Information” placard. Refer to “Tire Safety Infor-

mation” in “Servicing And Maintenance” for further infor-

mation.

STARTING AND OPERATING

285

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands

Chrysler 300 2018, Owner'S Manual

Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands