Chrysler 300 2018 Owner'S Manual Download Page 268

Page: 268 / 485

Front Park Assist
When the vehicle is in DRIVE the ParkSense Warning

screen will be displayed when an obstacle is detected.
The system will indicate a detected obstacle by showing a

single arc in one or more regions based on the obstacle’s

distance and location relative to the vehicle.
If an obstacle is detected in the center front region, the

display will show a single arc in the center front region. As

the vehicle moves closer to the obstacle, the display will

show the single arc moving closer to the vehicle. A fast

sound tone will be produced when reaching the second

flashing arc and will change to a continuous sound tone

when the first flashing arc appears.

If an obstacle is detected in the left and/or right front

region, the display will show a single flashing arc in the left

and/or right front region and will produce a fast sound

tone. As the vehicle moves closer to the obstacle, the

display will show the single arc moving closer to the

vehicle and the tone will change from fast to continuous.

No Tone/Solid Arc

266

STARTING AND OPERATING

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands

Chrysler 300 2018, Owner'S Manual

Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands