Chrysler 300 2018 Owner'S Manual Download Page 173 | Manualshive

Page: 173 / 485

background image

The seat belt webbing retractor will lock only during very

sudden stops or collisions. This feature allows the shoulder

part of the seat belt to move freely with you under normal

conditions. However, in a collision the seat belt will lock

and reduce your risk of striking the inside of the vehicle or

being thrown out of the vehicle.

WARNING!

•

Relying on the air bags alone could lead to more
severe injuries in a collision. The air bags work with
your seat belt to restrain you properly. In some
collisions, the air bags won’t deploy at all. Always
wear your seat belt even though you have air bags.

•

In a collision, you and your passengers can suffer
much greater injuries if you are not properly buckled
up. You can strike the interior of your vehicle or
other passengers, or you can be thrown out of the
vehicle. Always be sure you and others in your
vehicle are buckled up properly.

•

It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are more likely to be seriously injured or
killed.

(Continued)

WARNING!

(Continued)

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat belts.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly. Occupants, including the
driver, should always wear their seat belts whether
or not an air bag is also provided at their seating
position to minimize the risk of severe injury or
death in the event of a crash.

•

Wearing your seat belt incorrectly could make your
injuries in a collision much worse. You might suffer
internal injuries, or you could even slide out of the
seat belt. Follow these instructions to wear your seat
belt safely and to keep your passengers safe, too.

•

Two people should never be belted into a single seat
belt. People belted together can crash into one an-
other in a collision, hurting one another badly. Never
use a lap/shoulder belt or a lap belt for more than one
person, no matter what their size.

5

SAFETY

171

«
...
171
172
173
174
175
...
»

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2018

Porsche 911 Turbo S Wheel

Brand: FANATEC Pages: 9

PRIME DESIGN VCR 326

Brand: Safe Fleet Pages: 16

Prime Design VBC PC11

Brand: Safe Fleet Pages: 8

Prime Design AR1418

Brand: Safe Fleet Pages: 4

21 COVERT Series

Brand: Code 3 Pages: 16

CHASSIS CAB 3500 2017

Brand: RAM Pages: 16

Brand: Tessera4x4 Pages: 20

Brand: Hudson Pages: 34

MagicSpeed MS900

Brand: Waeco Pages: 120

Brand: Magneti Marelli Pages: 2

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 17

Brand: CAME Pages: 14

Brand: Davis Instruments Pages: 16

2013 Civic Sedan

Brand: Honda Pages: 368

Brand: Kia Pages: 38

Brand: LG Pages: 27

Brand: Bosch Pages: 16

Brand: JVC Pages: 218

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands