Chrysler 300 2018 Owner'S Manual Download Page 419

Page: 419 / 485

UCONNECT RADIOS

For detailed information about your Uconnect radio, refer

to your Uconnect Owner’s Manual Supplement.
NOTE:

Uconnect screen images are for illustration pur-

poses only and may not reflect exact software for your

vehicle.

PERSONALIZED MENU BAR

The Uconnect features and services in the main menu bar

are easily changed for your convenience. Simply follow

these steps:

1. Press the “Apps

” button to open the App screen.

2. Press and hold, then drag the selected App to replace an

existing shortcut in the main menu bar.

The new app shortcut, that was dragged down onto the

main menu bar, will now be an active App/shortcut.
NOTE:

This feature is only available if the vehicle is

stopped.

Uconnect 4C/4C NAV Main Menu

MULTIMEDIA

417

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands

Chrysler 300 2018, Owner'S Manual

Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands