Chrysler 300 2018 Owner'S Manual Download Page 420 | Manualshive

Page: 420 / 485

background image

CYBERSECURITY

Your vehicle may be a connected vehicle and may be

equipped with both wired and wireless networks. These

networks allow your vehicle to send and receive informa-

tion. This information allows systems and features in your

vehicle to function properly.
Your vehicle may be equipped with certain security fea-

tures to reduce the risk of unauthorized and unlawful

access to vehicle systems and wireless communications.

Vehicle software technology continues to evolve over time

and FCA US LLC, working with its suppliers, evaluates

and takes appropriate steps as needed. Similar to a com-

puter or other devices, your vehicle may require software

updates to improve the usability and performance of your

systems or to reduce the potential risk of unauthorized and

unlawful access to your vehicle systems.
The risk of unauthorized and unlawful access to your

vehicle systems may still exist, even if the most recent

version of vehicle software (such as Uconnect software) is

installed.

WARNING!

•

It is not possible to know or to predict all of the
possible outcomes if your vehicle’s systems are
breached. It may be possible that vehicle systems,
including safety related systems, could be impaired
or a loss of vehicle control could occur that may
result in an accident involving serious injury or
death.

•

ONLY insert media (e.g., USB, SD card, or CD) into
your vehicle if it came from a trusted source. Media
of unknown origin could possibly contain malicious
software, and if installed in your vehicle, it may
increase the possibility for vehicle systems to be
breached.

•

As always, if you experience unusual vehicle behav-
ior, take your vehicle to your nearest authorized
dealer immediately.

418

MULTIMEDIA

«
...
418
419
420
421
422
...
»

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2018

Brand: JAC Pages: 70

Brand: GARO Pages: 23

LS4 Wallmounted

Brand: GARO Pages: 15

Brand: HALE Pages: 44

Brand: Jeep Pages: 608

Brand: K&M Pages: 3

Brand: Calix Pages: 5

Brand: Inbay Pages: 20

Brand: Saab Pages: 288

Brand: Sunsky Pages: 9

Brand: Saab Pages: 9

Brand: Thule Pages: 2

Brand: rough country Pages: 4

Brand: Volvo Pages: 197

CERTA CTCVINCVR14A

Brand: Kogan Pages: 4

Brand: Poison Spyder Pages: 5

Brand: Setma Pages: 13

Brand: Crux Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands