Chrysler 300 2018 Owner'S Manual Download Page 429

Page: 429 / 485

Setting Name

Selectable Options

ParkSense — If

Equipped

Sound Only

Sound and Display

NOTE:
The ParkSense system will scan for objects behind the vehicle when the gear selector is in REVERSE and the vehicle

speed is less than 11 mph (18 km/h). It will provide an alert (audible and/or visual) to indicate the proximity to

other objects. The system can be enabled with Sound Only, or Sound and Display. To change the ParkSense status,

press and release the “Sound Only” or “Sound and Display” button.

Front ParkSense

Volume

Low

Medium

High

NOTE:
The Front ParkSense Chime Volume settings can be selected from the Uconnect System. The chime volume settings

include Low, Medium, and High. The factory default volume setting is MEDIUM. ParkSense will retain its last known

configuration state through ignition cycles.

Rear ParkSense

Volume

Low

Medium

High

NOTE:
The Rear ParkSense Chime Volume settings can be selected from the Uconnect System. The chime volume settings

include Low, Medium, and High. ParkSense will retain its last known configuration state through ignition cycles.

MULTIMEDIA

427

Summary of Contents for 300 2018






































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands

Chrysler 300 2018, Owner'S Manual

Search results

Summary of Contents for 300 2018

Reviews:

Related manuals for 300 2018

Brands by name

Popular brands