07/2020
Corona II
– LED Line Scan Illumination
PMA_CHR_CD40069_R05_Manual_Corona-II_XLC4
127
7.3.2 Disconnect the XLC4 controller from the XLC4 commander
The connection for both interfaces could be closed by using:
or
Note
:
To avoid error messages it is recommended to disconnect the XLC4 commander
from the XLC4 controller if the controller is switched, e.g. for setting a new
operating mode.
7.3.3 Connecting and disconnecting several XLC4 controllers
If there is a working setup with several XLC4 controllers, e.g. by a configuration file, it is
possible to connect them within a single operation.
1. Connect all
or
2. Disconnect all
or
7.3.4 Status of connections
The status of the connections is displayed at the top of each single tab as well as in the status
area in the bottom of each tab.
or