07/2020
Corona II
– LED Line Scan Illumination
PMA_CHR_CD40069_R05_Manual_Corona-II_XLC4
132
7.3.6.4 Setting the operating modes
There are four different operating modes available in the XLC4 controller.
This function relates to the current tab and its connected XLC4 controller.
Note
:
After setting a new operating mode is necessary to repower the controller for
setting the new operating mode in operation.
1. Command mode
You can control the module by commands from the XLC4 commander.
2. Bulb mode
The controller starts with the saved current in the controller after repowering the controller.
The c
urrent has to be saved with e.g. “IY 1000 W” by using the command line.
3. PWM mode
After setting this mode the brightness (current) could be controlled by a PWM signal at
port X6.