Chevrolet 2011 Impala Owner'S Manual Download Page 314 | Manualshive

Page: 314 / 392

background image

Black plate (58,1)

Chevrolet Impala Owner Manual - 2011

10-58

Vehicle Care

See

Tire Inspection on page 10

‑

56

and

Tire Rotation on page 10

‑

56

for

more information.

The rubber in tires ages over time.
This also applies for the spare tire,
if the vehicle has one, even if it is
never used. Multiple conditions
including temperatures, loading
conditions, and inflation pressure
maintenance affect how fast aging
takes place. Tires will typically
need to be replaced due to wear
before they may need to be
replaced due to age. Consult the tire
manufacturer for more information
on when tires should be replaced.

Vehicle Storage

Tires age when stored normally
mounted on a parked vehicle.
Park a vehicle that will be stored
for at least a month in a cool, dry,
clean area away from direct sunlight
to slow aging. This area should be
free of grease, gasoline, or other
substances that can deteriorate
rubber.

Parking for an extended period
can cause flat spots on the tires
that may result in vibrations while
driving. When storing a vehicle for
at least a month, remove the tires
or raise the vehicle to reduce the
weight from the tires.

Buying New Tires

GM has developed and matched
specific tires for the vehicle.
The original equipment tires
installed on the vehicle, when
it was new, were designed
to meet General Motors
Tire Performance Criteria
Specification (TPC Spec)
system rating. If you need
replacement tires, GM strongly
recommends that you get
tires with the same TPC Spec
rating. This way, the vehicle
will continue to have tires that
are designed to give the same
performance and vehicle safety,
during normal use, as the
original tires.

«
...
312
313
314
315
316
...
»

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Impala

HOIST-A-TOP JL CRANK

Brand: Lange Originals Pages: 13

Brand: Safe Fleet Pages: 38

Brand: Mercedes-Benz Pages: 368

Brand: Yakima Pages: 11

Brand: Whispbar Pages: 17

1506-PHX Cargo Plus

Brand: Ranger design Pages: 8

Brand: AUTOTECH Pages: 1

Brand: Cadillac Pages: 402

Brand: Cobra Pages: 2

Brand: Mitsubishi Pages: 362

Brand: Honda Pages: 22

Brand: Mercedes-Benz Pages: 494

Brand: Toyota Pages: 295

FABIA II TMB PS 035

Brand: Skoda Pages: 16

Brand: BMW Pages: 40

Brand: MiX Telematics Pages: 39

Brand: Crux Pages: 10

MULTI VEHICLE MOUNT MVM-45-05

Brand: Bracketron Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands