Chevrolet 2011 Impala Owner'S Manual Download Page 13

Page: 13 / 392

Black plate (7,1)

Chevrolet Impala Owner Manual - 2011

In Brief

1-7

Power Seats

To adjust a power seat, if equipped:

Move the seat forward or
rearward by sliding the control
forward or rearward.

Raise or lower the front or rear
of the seat cushion by moving
the front or rear of the control
up or down.

See

Power Seat Adjustment on

page 3

‑

Power Reclining Seatback

To adjust a power seatback,
if equipped:

Tilt the top of the control
rearward to recline.

Tilt the top of the control forward
to raise.

See

“

Power Reclining Seatbacks

”

under

Reclining Seatbacks on

page 3

‑

Manual Lumbar

Move the lever up or down to
increase or decrease lumbar
support.

See

Lumbar Adjustment on

page 3

‑

for more information.

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands

Chevrolet 2011 Impala, Owner'S Manual

Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands