Chevrolet 2011 Impala Owner'S Manual Download Page 208

Page: 208 / 392

Black plate (6,1)

Chevrolet Impala Owner Manual - 2011

8-6

Climate Controls

To change the passenger
compartment air filter:

1. Turn off the ignition when the

windshield wipers are in the up
position.

2. Raise the vehicle hood.

3. Pull back the hood weatherstrip

from the passenger side of the
vehicle halfway to center.

4. Remove the air inlet grille

retainers.

5. Lift the air inlet grille and

disconnect the washer hose
at the quick-connect.

6. Remove the air inlet grille.

7. Remove the water deflector

plate.

8. Remove the old passenger

compartment air filter.

9. Reverse the steps to install the

new air filter.

For best climate control system
performance, reinstall the air filter.

For the type of filter to use, see

Maintenance Replacement Parts on
page 11

‑

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands

Chevrolet 2011 Impala, Owner'S Manual

Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands