Chevrolet 2011 Impala Owner'S Manual Download Page 261

Page: 261 / 392

Black plate (5,1)

Chevrolet Impala Owner Manual - 2011

Vehicle Care

10-5

about how to service the vehicle
than this manual can. To order the
proper service manual, see

Service

Publications Ordering Information
on page 13

‑

This vehicle has an airbag system.
Before attempting to do your own
service work, see

Servicing the

Airbag-Equipped Vehicle on
page 3

‑

Keep a record with all parts receipts
and list the mileage and the date
of any service work performed. See

Maintenance Records on page 11

‑

Hood

To open the hood, do the following:

1. Pull the interior hood release

handle with this symbol on it.
It is located to the left of the
parking brake pedal.

2. Then go to the front of the

vehicle and release the
secondary hood latch, located
near the center of the hood front,
by pushing the latch to the right.

3. Lift the hood.

Before closing the hood, be sure
all the filler caps are on properly.
Then pull the hood down and close
it firmly.

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands

Chevrolet 2011 Impala, Owner'S Manual

Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands