Chevrolet 2011 Impala Owner'S Manual Download Page 47 | Manualshive

Page: 47 / 392

background image

Black plate (17,1)

Chevrolet Impala Owner Manual - 2011

Keys, Doors and Windows

2-17

The switches on the driver door
armrest are used to control each of
the windows. Each passenger door
has its own window switch.

The power window switches work
while the ignition is in ON/RUN,
ACC/ACCESSORY, or while
Retained Accessory Power (RAP)
is active. See

Retained Accessory

Power (RAP) on page 9

‑

21

.

To lower the window, press and hold
the front of the switch to the first
position until the window is at the
desired level. To raise the window,
pull up and hold the front of the
switch.

Express-Down Window

The driver window switch has
an express-down feature labeled
AUTO. This lets you lower the
window completely without holding
the switch. Press the front of the
switch to the second position and
release.

To stop the window while it is
lowering, briefly pull up on the
switch.

Window Lockout

o

(Window Lockout):

The driver

window switches also include a
lockout switch. Press the right
side of the switch to prevent the
rear passengers from using their
window switches. The driver can
still control all the windows and the
front passenger can control their
own window with the lockout on.
Press the left side of the switch to
return to normal window operation.
A red bar on the right side of the
switch indicates that the lockout
is off.

Sun Visors

Pull the sun visor down to block
glare. Detach the sun visor from the
center mount to pivot to the side
window, or to extend along the rod,
if available.

«
...
45
46
47
48
49
...
»

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Impala

Brand: RaceChip Pages: 12

Brand: Wagan Pages: 12

Brand: Mazda Pages: 527

2008 Escalade EXT

Brand: Cadillac Pages: 496

Brand: Horn Tools Pages: 6

Brand: Whispbar Pages: 77

Brand: ULTIMATE SPEED Pages: 21

Brand: CALIMA Pages: 9

Brand: Honda Pages: 20

2009 Rio Series

Brand: Kia Pages: 219

Brand: Chevrolet Pages: 428

Electra 225 1965

Brand: Buick Pages: 914

JEEP GL ADIATOR JT TOPPER ROOF RACK

Brand: JCROffroad Pages: 7

IVH-9000-2R440Q

Brand: Vecow Pages: 110

Brand: Belkin Pages: 2

Brand: Oldsmobile Pages: 354

2008 B2300 Truck

Brand: Mazda Pages: 280

Brand: BMW Pages: 392

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands