Chevrolet 2011 Impala Owner'S Manual Download Page 179

Page: 179 / 392

Black plate (7,1)

Chevrolet Impala Owner Manual - 2011

Infotainment System

7-7

To change the Auto Text setting:

1. Press MENU to display the radio

setup menu.

2. Press the softkey under

AUTO TXT tab on the radio
display.

3. Press the softkey under the ON

or OFF tab on the radio display.

is pressed and the song title

or artist information is longer
than what can be displayed, the
extra information will page every
three seconds when Auto Text
is activated.

Finding a Station

BAND:

Press to choose

between FM1, FM2, AM, or XM

™

(if equipped) on the Radio with CD
(Base). Press to choose between
FM, AM, XM (if equipped) on the
Radio with CD (MP3).

(Tune):

Turn to select radio

stations.

SEEK:

Press to seek or scan

stations with a strong signal in the
selected band.

To seek stations, press and
release

SEEK to go to the

previous station and stay there.

To scan stations, press and hold

SEEK for a few seconds until

the radio beeps once. The radio
goes to a station, plays for a few
seconds, then goes to the next
station. Press

SEEK again to

stop scanning.

To scan preset stations in the
selected band, press and hold

SEEK for four seconds until a

double beep sounds. The radio
goes to a stored preset, plays
for a few seconds, then goes
to the next stored preset. Press

SEEK again to stop scanning

preset stations.

SEEK:

Press to seek or scan

stations with a strong signal in the
selected band.

To seek stations, press and
release

SEEK to go to the

next station and stay there.

To scan stations, press and hold

SEEK for a few seconds until

the radio beeps once. The radio
goes to a station, plays for a few
seconds, then goes to the next
station. Press

SEEK again to

stop scanning.

To scan preset stations in the
selected band, press and hold

SEEK for four seconds until a

double beep sounds. The radio
goes to a stored preset, plays
for a few seconds, then goes
to the next stored preset. Press

SEEK again to stop scanning

preset stations.

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands

Chevrolet 2011 Impala, Owner'S Manual

Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands