Chevrolet 2011 Impala Owner'S Manual Download Page 263

Page: 263 / 392

Black plate (7,1)

Chevrolet Impala Owner Manual - 2011

Vehicle Care

10-7

A. Windshield Washer Fluid

Reservoir. See

“

Adding Washer

Fluid

”

under

Washer Fluid on

page 10

‑

B. Battery. See

Battery on

page 10

‑

C. Underhood Fuse Block.

See

Engine Compartment

Fuse Block on page 10

‑

D. Remote Positive (+) Terminal.

See

Jump Starting on

page 10

‑

E. Coolant Recovery Tank.

See

“

Checking Coolant

”

under

Cooling System on page 10

‑

Pressure Cap. See

Cooling

System on page 10

‑

G. Power Steering Fluid Cap.

See

Power Steering Fluid on

page 10

‑

H. Engine Oil Fill Cap. See

“

When

to Add Engine Oil

”

under

Engine Oil on page 10

‑

Engine Oil Dipstick.
See

“

Checking Engine Oil

”

under

Engine Oil on page 10

‑

Automatic Transmission
Fluid Dipstick (Out of View).
See

“

Checking the Fluid Level

”

under

Automatic Transmission

Fluid on page 10

‑

K. Brake Master Cylinder

Reservoir. See

“

Brake Fluid

”

under

Brakes on page 10

‑

Engine Air Cleaner/Filter.
See

Engine Air Cleaner/Filter

on page 10

‑

Engine Oil

To ensure proper engine
performance and long life,
careful attention must be paid
to engine oil. Following these
simple, but important steps will
help protect your investment:

Always use engine oil approved
to the proper specification and
of the proper viscosity grade.
See

“

Selecting the Right Engine

Oil

”

in this section.

Check the engine oil level
regularly and maintain the
proper oil level. See

“

Checking

Engine Oil

”

and

“

When to Add

Engine Oil

”

in this section.

Change the engine oil at the
appropriate time. See

Engine

Oil Life System on page 10

‑

Always dispose of engine oil
properly. See

“

What to Do with

Used Oil

”

in this section.

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands

Chevrolet 2011 Impala, Owner'S Manual

Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands