Chevrolet 2011 Impala Owner'S Manual Download | Manualshive

Page: 207 / 392

background image

Black plate (5,1)

Chevrolet Impala Owner Manual - 2011

Climate Controls

8-5

Air Vents

Use the thumbwheel located
below or to the side of the outlet, to
change the direction of the air flow.

Operation Tips

.

Clear away any ice, snow,
or leaves from the air inlets at
the base of the windshield that
may block the flow of air into
the vehicle.

.

Use of non-GM approved hood
deflectors may adversely affect
the performance of the system.

.

Keep the path under the front
seats clear of objects to help
circulate the air inside the
vehicle more effectively.

.

If the airflow seems low when
the fan is at the highest setting,
the passenger compartment air
filter, if equipped, may need to
replaced. For more information,
see

Passenger Compartment

Air Filter on page 8

‑

5

and

Scheduled Maintenance on
page 11

‑

2

.

.

If fogging reoccurs while in
vent or bi-level modes with
mild temperature throughout
the vehicle, turn on the air
conditioner to reduce windshield
fogging.

Maintenance

Passenger Compartment
Air Filter

The vehicle has a passenger
compartment particulate air
filter. It is located in the engine
compartment, below the air inlet
grille on the passenger side.

The filter traps most of the
pollen from air entering the
climate control system. It needs
to be changed periodically to
ensure system performance.
For information on how often
to change the passenger
compartment air filter, see

Scheduled Maintenance on
page 11

‑

2

.

«
...
205
206
207
208
209
...
»

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Impala

Brand: GMC Pages: 140

Brand: LAS Pages: 44

Brand: LAS Pages: 24

01 29 9 416 497

Brand: BMW Pages: 5

Brand: Whispbar Pages: 14

Brand: Porsche Pages: 313

Brand: Mercedes-Benz Pages: 358

Brand: Baja Designs Pages: 5

2005 P207 Explorer Sport Trac

Brand: Ford Pages: 540

Brand: Kuda Pages: 2

Brand: KEKO Pages: 13

Stealth 4191F Series

Brand: Road Armor Pages: 5

ZapCharger Portable C1

Brand: ZAPTEC Pages: 20

Brand: Jaeger Pages: 11

Brand: ATS Pages: 12

Brand: Reliant Pages: 116

Brand: iSimple Pages: 8

Brand: Nos Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands