Chevrolet 2011 Impala Owner'S Manual Download Page 182

Page: 182 / 392

Black plate (10,1)

Chevrolet Impala Owner Manual - 2011

7-10

Infotainment System

Finding an XM Channel

BAND:

Press to switch between

AM, FM, or XM, if equipped.

(Tune):

Turn to manually select

an XM channel.

SEEK:

Press to go to the

previous XM channel.

To scan stations, press and hold

SEEK for a few seconds until

the radio beeps once. The radio
goes to a cahnnel, plays for a
few seconds, then goes to the
next station. Press

SEEK

again to stop scanning.

SEEK:

Press to go to the next

XM channel.

To scan stations, press and hold

SEEK for a few seconds until

the radio beeps once. The radio
goes to a station, plays for a few
seconds, then goes to the next
station. Press

SEEK again to

stop scanning.

REV:

Press to go to the

previous XM category.

FWD:

Press to go to the next

XM category.

Finding a Category (CAT)
Channel

To find XM channels in a category:

1. Press the CAT button to display

the category tabs. Continue
pressing the CAT button until the
desired category name displays.

Radios with CD and DVD
can also navigate the
category list by pressing
the

FWD or the

REV

button.

2. Press either of the two softkeys

below the desired category tab
to immediately tune to the first
XM station in that category.

To go to the previous or next XM
station in the selected category,
do one of the following:

Turn the

knob.

Press the softkey below the
right or left arrows in the
category tab.

Press

SEEK or

SEEK.

3. To exit the category search

mode, press the FAV button
or BAND button to display the
favorites again.

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands

Chevrolet 2011 Impala, Owner'S Manual

Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands