Chevrolet 2011 Impala Owner'S Manual Download Page 12

Page: 12 / 392

Black plate (6,1)

Chevrolet Impala Owner Manual - 2011

1-6

In Brief

Windows

The power window switches
are on the driver door armrest.
Each passenger door has a switch
that controls only that window.

Press the front of the switch to the
first position to open the window.
Pull the switch up to close it.

For more information, see

Power

Windows on page 2

‑

Seat Adjustment

Manual Seats

To adjust a manual seat:

1. Lift the bar under the front edge

of the seat cushion to unlock
the seat.

2. Slide the seat to the desired

position and release the bar.

3. Try to move the seat back and

forth to be sure the seat is
locked in place.

See

Seat Adjustment on page 3

‑

To adjust the seatback, see

“

Manual

Reclining Seatbacks

”

under

Reclining Seatbacks on page 3

‑

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands

Chevrolet 2011 Impala, Owner'S Manual

Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands