Chevrolet 2011 Impala Owner'S Manual Download Page 56

Page: 56 / 392

Black plate (8,1)

Chevrolet Impala Owner Manual - 2011

3-8

Seats and Restraints

Rear Seats

Rear Seats (Split Folding)

Flip and Fold Feature

On vehicles with this feature, the
seat cushions flip forward and the
seatbacks fold down to create an
extended flat cargo area.

To flip the seat cushion and fold the
seatback:

1. Make sure the front seats are

not reclined. The seat cushion
will not flip forward completely
if the front seats are reclined.

2. Flip the seat cushion forward

by pulling up on the tab in the
center of the seat cushion where
the seatback meets the seat
cushion.

3. Lower the seatback by pulling

forward on the tab on the
outboard side of the seatback.

Summary of Contents for 2011 Impala









































































































































































































































































































































































































Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands

Chevrolet 2011 Impala, Owner'S Manual

Search results

Summary of Contents for 2011 Impala

Reviews:

Related manuals for 2011 Impala

Brands by name

Popular brands