Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 263

Page: 263 / 432

4-31

Driving at Night

Night driving is more dangerous than day driving.
One reason is that some drivers are likely to be
impaired

by alcohol or drugs, with night vision

problems, or by fatigue.

Here are some tips on night driving.
D Drive defensively.
D Don’t drink and drive.
D Since you can’t see as well, you may need to

slow down and keep more space between you
and other vehicles.

D Slow down, especially on higher speed roads. Your

headlamps can light up only so much road ahead.

D In remote areas, watch for animals.
D If you’re tired, pull off the road in a safe place

and rest.

No one can see as well at night as in the daytime. But as
we get older these differences increase. A 50

year

old

driver may require at least twice as much light to see the
same thing at night as a 20

year

old.

Summary of Contents for 2002 TrailBlazer
















































































































































































































































































































































































































































Search results

Summary of Contents for 2002 TrailBlazer

Reviews:

Related manuals for 2002 TrailBlazer

Brands by name

Popular brands

Chevrolet 2002 TrailBlazer, Owner'S Manual

Search results

Summary of Contents for 2002 TrailBlazer

Reviews:

Related manuals for 2002 TrailBlazer

Brands by name

Popular brands