manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 240

4-8

Here’s how anti

-

lock works. Let’s say the road is wet.

You’re driving safely. Suddenly an animal jumps out in
front of you.

You slam on the brakes and continue braking. 
Here’s what happens with ABS.

A computer senses that wheels are slowing down. If one
of the wheels is about to stop rolling, the computer will
separately work the brakes at each front wheel and at
both rear wheels.

The anti

-

lock system can change the brake pressure faster

than any driver could. The computer is programmed to
make the most of available tire and road conditions. 
This can help you steer around the obstacle while 
braking hard.

As you brake, your computer keeps receiving updates on
wheel speed and controls braking pressure accordingly.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands