manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 303

5-11

Cooling System

When you decide it’s safe to lift the hood, here’s what
you’ll see:

A. Coolant Recovery Tank

B. Radiator Pressure Cap

C. Engine Fan

If the coolant inside the coolant recovery tank is boiling,
don’t do anything else until it cools down.

When the engine is cold,
the coolant level should 
be at least up to the 
FULL COLD mark. 
If it isn’t, you may have a
leak in the radiator hoses,
heater hoses, radiator,
water pump or somewhere
else in the cooling system.

CAUTION:

Heater and radiator hoses, and other engine
parts, can be very hot. Don’t touch them. 
If you do, you can be burned.

Don’t run the engine if there is a leak. If you run
the engine, it could lose all coolant. That could
cause an engine fire, and you could be burned.
Get any leak fixed before you drive the vehicle.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands