manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 282

4-50

Adding a Snow Plow or 
Similar Equipment

Your vehicle was neither designed nor intended for a
snow plow.

NOTICE:

Adding a snow plow or similar equipment to
your vehicle can damage it, and the repairs
wouldn’t be covered by warranty. Do not install a
snow plow or similar equipment on your vehicle.

Towing a Trailer

CAUTION:

If you don’t use the correct equipment and drive
properly, you can lose control when you pull a
trailer. For example, if the trailer is too heavy, 
the brakes may not work well 

--

 or even at all.

You and your passengers could be seriously
injured. Pull a trailer only if you have followed
all the steps in this section. Ask your dealer for
advice and information about towing a trailer
with your vehicle.

NOTICE:

Pulling a trailer improperly can damage your
vehicle and result in costly repairs not covered by
your warranty. To pull a trailer correctly, follow
the advice in this part, and see your dealer for
important information about towing a trailer
with your vehicle.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands