manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 381

6-55

Vehicle Identification Number (VIN)

This is the legal identifier for your vehicle. It appears 
on a plate in the front corner of the instrument panel, 
on the driver’s side. You can see it if you look through
the windshield from outside your vehicle. The VIN also
appears on the Vehicle Certification and Service Parts
labels and the certificates of title and registration.

Engine Identification

The 8th character in your VIN is the engine code. This
code will help you identify your engine, specifications
and replacement parts.

Service Parts Identification Label

You’ll find this label on the inside of the glove box. 
It’s very helpful if you ever need to order parts. 
On this label is:
D your VIN,
D the model designation,
D paint information and
D a list of all production options and special equipment.
Be sure that this label is not removed from the vehicle.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands