background image

1-22

The best way to protect the fetus is to protect 
the mother. When a safety belt is worn properly, 
it’s more likely that the fetus won’t be hurt in a crash.
For pregnant women, as for anyone, the key to making
safety belts effective is wearing them properly.

Right Front Passenger Position

To learn how to wear the right front passenger’s 
safety belt properly, see “Driver Position” earlier in 
this section.

The right front passenger’s safety belt works the same
way as the driver’s safety belt 

--

 except for one thing. 

If you ever pull the shoulder portion of the belt out all
the way, you will engage the child restraint locking
feature. If this happens, just let the belt go back all 
the way and start again.

Air Bag Systems

This part explains the frontal and side impact air bag systems.

Your vehicle has four air bags 

--

 a frontal air bag 

for the driver, another frontal air bag for the right front
passenger, a side impact air bag for the driver, and
another side impact air bag for the right front passenger.

Frontal air bags are designed to help reduce the risk 
of injury from the force of an inflating frontal air bag.
But these air bags must inflate very quickly to do their
job and comply with federal regulations.

Here are the most important things to know about the 
air bag systems:

CAUTION:

You can be severely injured or killed in a crash if
you aren’t wearing your safety belt 

--

 even if you

have air bags. Wearing your safety belt during a
crash helps reduce your chance of hitting things
inside the vehicle or being ejected from it. Air
bags are designed to work with safety belts but
don’t replace them.

CAUTION: (Continued)

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews: