background image

2-31

Shifting Into PARK (P)

CAUTION:

It can be dangerous to get out of your vehicle if
the shift lever is not fully in PARK (P) with the
parking brake firmly set. Your vehicle can roll. If
you have left the engine running, the vehicle can
move suddenly. You or others could be injured.
To be sure your vehicle won’t move, even when
you’re on fairly level ground, use the steps that
follow. With four

-

wheel drive, your vehicle will

be free to roll 

--

 even if your shift lever is in

PARK (P) 

--

 if your transfer case is in

NEUTRAL. So be sure the transfer case is in a
drive gear 

--

 not in NEUTRAL. See “Four

-

Wheel

Drive (Automatic Transfer Case)” in the Index.
Always put the shift lever fully in PARK (P) with
the parking brake firmly set. If you’re pulling a
trailer, see “Towing a Trailer” in the Index.

1. Hold the brake pedal down with your right foot and

set the parking brake.

2. Move the shift lever into PARK (P) like this:

D Press the button in on the side of the lever.
D Push the lever all the way toward the front of 

the vehicle.

3. Turn the ignition key to LOCK.

4. Remove the key and take it with you. If you 

can leave your vehicle with the key, your vehicle is
in PARK (P).

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews: