manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 395

Scheduled Maintenance

7-6

Engine Oil Scheduled Maintenance

Change engine oil and filter as indicated by the GM
Oil Life System

t (or every 12 months, whichever

occurs first). Reset the system. The system will show
you when to change the oil 

--

 usually between

3,000 miles (5 000 km) and 12,000 miles (20 000 km)
since your last oil change. Under severe conditions, the
indicator may come on before 3,000 miles (5 000 km).
Never drive your vehicle more than 12,000 miles
(20 000 km) or 12 months without an oil and 
filter change.

The system won’t detect dust in the oil. So if you drive
in a dusty area, be sure to change your oil and filter
every 3,000 miles (5 000 km) or sooner if the CHANGE
ENG OIL light appears. Remember to reset the Oil Life
System when the oil and filter have been changed. 
See “Oil Life System” in the Index for information 
on resetting.

An Emission Control Service.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands