manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 183

3-11

Ventilation System

For mild outside temperatures when little heating 
or cooling is needed, use the panel outlet setting 
(on the manual system) to direct outside air through
your vehicle. Air will flow through the instrument 
panel outlets.

Your vehicle’s flow

-

through ventilation system supplies

outside air into the vehicle when it’s moving. When the
vehicle is not moving, you can get outside air to flow
through by selecting any air delivery mode and any 
fan speed.

Your vehicle has air outlets that allow you to adjust 
the direction and amount of airflow inside the vehicle.
Move the louvers up or down and move the control 
in the center of each outlet side

-

to

-

side to direct the 

air from the outlet. Use the thumbwheel next to or
underneath the outlet to close the louvers. For the most
efficient airflow and temperature control, keep the outlet
in the fully opened position.

The rear seat outlets can be used to adjust the airflow
toward either seating area, the floor or upward. Move
the control in the center of each outlet in any direction 
to direct airflow.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands