manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 299

5-7

9. Connect the other end of

the negative (

-

) cable to

the remote negative (

-

)

terminal on the vehicle
with the dead battery.

10. Now start the vehicle with the good battery and run

the engine for a while.

11. Try to start the vehicle that had the dead battery. 

If it won’t start after a few tries, it probably 
needs service.

NOTICE:

Damage to your vehicle may result from electrical
shorting if jumper cables are removed incorrectly.
To prevent electrical shorting, take care that 
they don’t touch each other or any other metal.
The repairs wouldn’t be covered by your warranty.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands