Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 107

Page: 107 / 432

2-38

Headlamp High/Low-Beam Changer

To change the headlamps from low to high beam, push
the lever toward the instrument panel. To return to
low

beam headlamps, pull the multifunction lever

toward you. Then release it.

When the high beams are
on, this indicator light on
the instrument panel cluster
will also be on.

Flash-to-Pass Feature

This feature lets you use your high

beam headlamps

to signal a driver in front of you that you want to pass.
It works even if your headlamps are in the
automatic position.

To use it, pull the turn signal lever toward you, then
release it.

If your headlamps are in the automatic position or on
low beam, your high

beam headlamps will turn on.

They’ll stay on as long as you hold the lever toward
you. The high

beam indicator on the instrument panel

cluster will come on. Release the lever to return to
normal operation.

Summary of Contents for 2002 TrailBlazer
















































































































































































































































































































































































































































Search results

Summary of Contents for 2002 TrailBlazer

Reviews:

Brands by name

Popular brands

Chevrolet 2002 TrailBlazer, Owner'S Manual

Search results

Summary of Contents for 2002 TrailBlazer

Reviews:

Brands by name

Popular brands