manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 128

2-59

Cargo Tie Downs

There are five cargo tie
downs in the rear of your
vehicle that allow you to
strap cargo in and keep it
from moving.

Rear Floor Stowage Lid

CAUTION:

If the rear floor stowage lid isn’t secured
properly, it can move around in a collision or
sudden stop. People in the vehicle could be
injured. Be sure to secure the rear floor stowage
lid properly.

Your vehicle has a rear floor stowage lid located in 
the rear cargo area that allows you to put items
underneath it.

To remove the rear floor stowage lid, do the following:

1. Press the latch release and lift up the latch handle.

2. Raise the lid slightly to unhook it.

3. Pull the lid rearward to release it from the forward

mounting tabs.

To reinstall the rear floor stowage lid, reverse the
previous steps. Make sure the lid is secure by applying
slight pressure to the latch until you hear it click.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands