manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 190

3-18

Accessing RDS Stations

To access RDS stations perform the following steps:

1. Push the SEEK TYPE button or turn the P

-

TYPE

LIST AUDIO control to display the program 
type list.

2. Turn the control either clockwise or

counterclockwise to select a program type. The list 
is alphabetical. If you select ANY TYPE your radio
will seek to the first PTY available.

3. Push the SEEK TYPE button to activate search.

VOL PWR: Turn this control clockwise to increase
volume when RDS interrupts regular play. Turn it
counterclockwise to decrease volume.

P

-

TYPE LIST AUDIO: Turn this control clockwise 

or counterclockwise to select the Program Type (PTY)
you want to listen to. TYPE and a PTY will appear on
the display. Press the SEEK TYPE button and the radio 
will seek to the first RDS broadcaster of the selected
program type. If the radio cannot find the desired
program type, NONE will appear on the display and the
radio will return to the last station you were listening to.

AM FM: The AM FM button operates the alternate
frequency feature. This feature allows the radio to
switch automatically to a stronger station with the same
programming. Alternate frequency is off by default from
the factory. Press and hold AM FM for two seconds to
turn alternate frequency on or off. AF ON or AF OFF
will appear on the display and the radio will beep once.
The radio will not switch automatically to other stations
when alternate frequency is off.

SEEK TYPE: Press this button to go to a station with
the last selected PTY; TYPE and the last selected PTY
will appear on the display, if it is not already showing.
Press SEEK TYPE a second time to seek. If a station
with the selected PTY is not found, the radio will return
to the original station and display NONE.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands