Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 98

Page: 98 / 432

2-29

Shifting to NEUTRAL

To shift the transfer case to NEUTRAL first make sure
the vehicle is parked so that it will not roll:

1. Set the parking brake.

2. Start the vehicle.

3. Connect the vehicle to the towing vehicle.

4. Put the transmission in NEUTRAL (N).

5. Shift the transfer case to 2HI.

6. Turn the transfer case knob all of the way past 4LO

and hold it there for a minimum of 10 seconds.
The NEUTRAL (N) indicator light will come on.

7. Shift the transmission to REVERSE (R) for one

second, then shift the transmission to DRIVE (D)
for one second.

8. Turn the ignition to LOCK.

9. Place the transmission shift lever to PARK (P).

10. Release the parking brake prior to towing.

Shifting Out of NEUTRAL

To shift the transfer case out of NEUTRAL:

1. Set the parking brake and apply the regular

brake pedal.

2. Start the vehicle with the transmission in PARK (P).

3. Turn the transfer case knob to the desired shift

position (2HI, 4HI or A4WD).

4. Put the transmission in NEUTRAL (N).

5. After the transfer case has shifted out of NEUTRAL,

the red light will go out. Shift the transmission lever
to the desired position.

6. A re

engagement sound is normal when shifting out

of NEUTRAL.

Summary of Contents for 2002 TrailBlazer
















































































































































































































































































































































































































































Search results

Summary of Contents for 2002 TrailBlazer

Reviews:

Related manuals for 2002 TrailBlazer

Brands by name

Popular brands

Chevrolet 2002 TrailBlazer, Owner'S Manual

Search results

Summary of Contents for 2002 TrailBlazer

Reviews:

Related manuals for 2002 TrailBlazer

Brands by name

Popular brands