manualshive.com logo in svg

Chevrolet 2002 TrailBlazer, Owner'S Manual

Share
Download
Chevrolet 2002 TrailBlazer Owner'S Manual Download Page 67

1-55

CAUTION:

Never do this.

Here two children are wearing the same belt. 
The belt can’t properly spread the impact forces.
In a crash, the two children can be crushed
together and seriously injured. A belt must 
be used by only one person at a time.

Q:

What if a child is wearing a lap

-

shoulder belt,

but the child is so small that the shoulder belt is
very close to the child’s face or neck?

A:

If the child is sitting in a seat next to a window,
move the child toward the center of the vehicle. 
If the child is sitting in the center rear seat
passenger position, move the child toward the
safety belt buckle. In either case, be sure that the
shoulder belt still is on the child’s shoulder, so that
in a crash the child’s upper body would have the
restraint that belts provide. If the child is sitting 
in a rear seat outside position, see “Rear Safety 
Belt Comfort Guides” in the Index.

Summary of Contents for 2002 TrailBlazer

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands