Configuring the Controller
7-7
– Any number between 0 and 7—Select a specific number if you want the
controller’s LUN to stay the same when you reboot.
To change the controller’s target ID and LUN:
1
From the System Menu, select
Configuration
Menu
and press
Enter
.
The Configuration Menu screen displays.
2
Select
Host Configuration
and press
Enter
.
The Host Configuration screen displays.
3
Select
Target ID
and press
Enter
.
The Target ID screen displays.
4
Select the option or number you want to use and press
Enter
.
To
Do this
Set a SCSI Target ID
!
Select the [target ID] you want to
use and press
Enter
.
This can be any number from 0 to
15.
FC Loop ID
Let the FC loop initialization
process determine the Loop ID for
the channel each time the
controller powers up
!
Select
SOFT
and press
Enter
.
This is the default setting.
Summary of Contents for G5312
