G- and K-Series User’s Guide
7-22
3
Select
Battery
and press
Enter
.
The Battery screen displays. The current setting is marked with an * next to it
4
Select the option you want and press
Enter
.
Changing the Utility Priority
You can change the priority at which all utilities (Verify, Reconstruct, Expand,
Initialize, etc.) run when there are active I/O operations competing for the controller’s
CPU. The choices are:
!
High (default)
!
Medium
!
Low
For example, select High if your highest priority is to get the array back to a fully
fault-tolerant state. This causes heavy I/O with the host to be slower than normal.
Select Low priority if streaming data without interruption, such as for a Web server, is
more important than data redundancy. This allows the reconstruct or other utility to
run at a slower rate with minimal effects on host I/O.
Summary of Contents for G5312
