G- and K-Series User’s Guide
7-4
3
Select
Set Time
and press
Enter
.
The Set Time screen displays.
4
Enter the time you want and press
Enter
.
Enter the time in the following format: hh:mm:ss.
The system confirms that you want to make the change.
5
Select
Yes
and press
Enter
to make the changes.
The system confirms that the changes are made.
6
Press
Esc
to return to the Configuration Menu.
Changing the Controller’s LUN and SCSI
Target ID or Fibre Channel Loop ID
You can change the SCSI target ID or the Fibre Channel Loop ID and the LUN that
the controller uses on the host bus.
Understanding LUNs
The RAID controller supports up to eight SCSI Logical Unit Numbers (LUNs) that
are numbered zero through seven. There are three different types of LUNs: controller,
SEP, and Array. These LUNs have the following characteristics:
Summary of Contents for G5312
