G- and K-Series User’s Guide
7-2
Caution:
Anyone accessing an array when you shut down the controller
will lose access and may lose data.
To shut down and restart the controller:
1
From the System Menu, select
Shutdown/Restart
and press
Enter
.
The system confirms that you want to shut down.
2
Select
Yes
and press
Enter
.
The system confirms that it has shut down.
3
Press
Enter
to reboot.
The system performs its self-test. When you see the Disk Array Administrator
initial screen, the controller is ready. See Chapter 3,
Accessing the Disk Array
Administrator Software
.
Changing the Date and Time
You can change the controller’s date and time.
To set the controller’s date:
1
From the System Menu, select
Configuration Menu
and press
Enter
.
The Configuration Menu screen displays.
2
Select
Set Date/Time
and press
Enter
.
The Set Date/Time screen displays.
!
Summary of Contents for G5312
