Page 92
Bound Number Step Rule
It appears when the connection method is set to Static Binding, used to configure
the step rule of the bound number in the batch setting, three options available:
Increase, Decrease, Same.
Bound Number Step Size
It appears when the connection method is set to Static Binding, used to configure
the increase or decrease step size of the bound number in the batch setting,
After configuration, click
Save
to save the settings into the gateway, or click
Cancel
to cancel the
settings.
3.8.2 Port Group
Figure 3-109 Port Group Settings Interface
See Figure 3-109 for the port group settings interface. A port group is a set containing single or
multiple ports, used to specify such properties as
Port Selection
and
Authentication Mode
for
all the ports in it. A new port group can be added by the
Add New
button on the bottom right
corner of the above list. See Figure 3-110 for the port group adding interface. Note that a port
which has been occupied by one port group cannot be chosen by others.
Figure 3-110 Add New Port Group
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
