CarpeStar SMG Series User Manual Download Page 35

Page: 35 / 139

Page 29

Figure 3-23 Add New SIP Server

All the items except Index and Description are the same as those on

the SIP

interface (

3.4.1 SIP

Item

Description

Index

The index of each SIP server. The gateway supports up to 8 SIP servers.

Description

More information about each SIP server, with the default value of

default

After configuration, click

Save

to save the above settings into the gateway or click

Cancel

cancel the settings. See Figure 3-24 for the SIP server management interface.

Figure 3-24 SIP Server Management

Click

Modify

in the above figure to modify the configuration of the SIP server. See Figure 3-25.

The configuration items on this interface are the same as those on the

Add New SIP Server

interface.

Series

Wireless

Gateway

User

Manual

(Version

1.9.0)

Summary of Contents for SMG Series












































































































































Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands

CarpeStar SMG Series, User Manual

Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands