Page 65
Mailbox Account,
Password
Sets the account and password of the mailbox.
Outgoing (SMTP),
Port
Sets the server address and port for Email sending.
Incoming (POP3),
Port
Sets the server address and port for Email receiving.
SSL
Sets whether to encrypt the sending/receiving mails via SSL.
Show Log
Click it to display the log which contains the Email to SMS converted information.
Bind Mailbox to Port
Once this feature is enabled, the mailbox can be bound to the designated port. Click
Setting
to go into the
“Bind Mailbox to Port-Settings” interface.
Convert SMS to
SMS can be converted to Emails if this feature is enabled.
Target Address
The target address to which the Email converted by SMS will be sent.
Subject
Sets the subject for the Email converted by SMS.
Covert Email to SMS
When this feature is enabled, the mails in a designated format (See Note 4 and 5 in
Figure 3-69) can be converted to SMS.
Receiving Cycle
Sets the cycle to receive mails. Range of value: 1~60, calculated by minute, with
the default value of
5
.
Mail Filtering
Sets the condition to convert the mail to SMS, two options including: Subject
matching and Number matching, with the default value of
Subject matching
. If the
Subject matching mode is selected, you can set the subject of your own choice, and
the email format is
“[Number]XXX[End] [SMS]YYY[End]; (Case Insensitive)”;
If the Number matching mode is selected, the mail subject must be numbers,
multiple numbers are supported which should be separated by
“,”, and the email
format is
“[SMS]......[end]”.
SMS Sending Port
Sets the port from which the SMS will be sent out. The default value is
automatic
.
Return Receipt
Sets whether to receive a return receipt telling the mail is sent successfully or not.
After configuration, click
Save
to save the settings into the gateway or click
Reset
to reset the
settings.
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
