CarpeStar SMG Series User Manual Download Page 70

Page: 70 / 139

Page 64

Item

Description

Default USSD Encoding

Sets the default encoding format for USSD, two options available: ASCII and UCS2.

Port

Sets the port used to send the USSD request.

Request

Inputs the content of the USSD request.

Respond

Displays the result of the USSD respond.

All

Selects all the available ports to send the same USSD request.

Click

Send

in Figure 3-68 to send out the USSD request. Click

Clear Data

to clear all data.

Note:

This configuration is unavailable for CDMA module.

3.6.7 Email

Figure 3-69 Email Setting Interface

See Figure 3-69 for the Email Setting interface. The table below explains the configuration items
on the Email Setting interface.

Item

Description

Series

Wireless

Gateway

User

Manual

(Version

1.9.0)

Summary of Contents for SMG Series












































































































































Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands

CarpeStar SMG Series, User Manual

Search results

Summary of Contents for SMG Series

Reviews:

Related manuals for SMG Series

Brands by name

Popular brands