Page 10
Step 5: Log in the gateway.
Enter the original IP address (192.168.1.101) of the wireless gateway in the browser to go to the
WEB interface of the gateway. The original username and password of the gateway are both
„admin‟. For detailed instructions about login, refer to
3.1 System Login
. We suggest you change
the initial username and password via
„System Tools
Change Password
‟ on the WEB interface
as soon as possible after your first login. For detailed instructions about changing the password,
refer to
3.11.6 Change Password
. After changing the password, you are required to log in again.
Step 6: Modify IP address of the gateway.
You can modify the IP address of the gateway via
„Advanced Settings
Network
‟ on the WEB
interface to put it within your company
‟s LAN. Refer to
3.5.1 Network
for detailed instructions
about IP modification. After changing the IP address, you shall log in the gateway again using
your new IP address.
Step 7: Make phone calls.
Note: For your easy understanding and manipulation, all examples given in this step do not
involve registration, that is, SIP initiates calls in a point-to-point mode.
Situation 1: Call from a station to an IP phone (Tel
IP)
1.
Go to
„Advanced Settings
Dialing Rule
‟ on the WEB interface and click the „Add New‟
button to add a new dialing rule. Refer to
3.5.4 Dialing Rule
for detailed instructions. Enter
either a particular number or a string of
„x‟s to represent several random numbers. For
example,
„xxx‟ denotes 3 random numbers. You may use the default value of „Index‟ and are
required not to leave
„Description‟ empty.
Example:
Set
Index
to
99
, fill in
Description
with
test
and configure
Dial Rule
to
123
.
2.
Go to
„Port Settings
Port Group
‟ on the WEB interface and click the „Add New‟ button to
create a new port group and add the corresponding ports to it. Refer to
3.8.2 Port Group
for
detailed instructions. You may use the default values of other configuration items and are
required not to leave
„Description‟ empty.
Example:
Provided the added port is Port1, check the checkbox before
Port1
, set
Index
to
1
,
fill in
Description
with
test
, and keep the default values of other configuration items.
3.
Go to
„Route Settings
Tel
IP
‟ on the WEB interface and click the „Add New‟ button to add
a new routing rule. Refer to
3.9.3 Tel
IP
for detailed instructions. Select the port group
created in Step2 as
„Source Port Group‟ and fill in „Destination IP‟ and „Destination Port‟ with
the IP address and the Port number you plan to call. You may use the default values of other
configuration items and are required not to leave
„Description‟ empty.
Example:
Provided the remote IP address intended to call is 192.168.0.111 and the port is
5060. Set
Index
to
63
,
Source Port Group
to
1
, fill in
Description
with
test
, configure
Destination IP
to
192.168.0.111
,
Destination Port
to
5060
, and keep the default values of
other configuration items.
4.
Use an external phone to call the number of this SIM card, and then follow the cue tone to
dial the number set in Step1 to ring the remote IP phone If you have set a particular number in
Step 1, only this number you can dial; if you have set a string of
„x‟s, how many „x‟s there are,
how many random numbers you can dial.
Example:
The external phone dials the number of this SIM card, and then follows the cue
tone to dial 123. Then the IP phone with the IP address 192.168.0.111 and the port 5060 will
ring.
Situation 2: Call from an IP phone to a station (IP
Tel)
1.
Go to
„Port Settings
Port Group
‟ on the WEB interface and click the „Add New‟ button to
create a new port group and add the corresponding ports which are connected with stations
to it. Refer to
3.8.2 Port Group
for detailed instructions. You may use the default values of
other configuration items and are required not to leave
„Description‟ empty.
CMG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
