Page 83
Route Calls back to
IP Side
Once this feature is enabled, the calls from the PSTN terminal to the soft terminal
will be routed to the soft terminal of the original call. That is, when the soft terminal A
called the PSTN terminal B via our gateway, if B doesn
‟t answer the call or A
cancels the call, the later call from B back to the gateway will be routed to the soft
terminal A directly.
Once this feature is disabled, the later call dialed back by the remote terminal B will
be routed to the original calling party A only if B doesn
‟t answer the first call from A
to B.
Click
Modify
to save the settings into the gateway, click
Reset
to restore the configurations, or
click
Return
to cancel the settings.
3.7.5 Blacklist
Figure 3-99 Incoming Call Blacklist Interface
See Figure 3-99 for the Incoming Call Blacklist interface. You can designate certain numbers to
limit corresponding calls to go into the gateway (calls from the gateway out as well as the SMS are
unlimited). The table below explains the configuration items shown in the above figure:
Item
Description
Blacklist
Sets the number list to forbid certain calls to go into the gateway.
Processing Mode
Sets the processing mode for the calls from the numbers in the blacklist to the
gateway, two options available: Hang up directly and Hang up after ringing, with the
default value of
Hang up directly
.
Click
Save
to save the settings into the gateway, click
Reset
to restore the configurations.
S
MG
Series
Wireless
Gateway
User
Manual
(Version
1.9.0)
