7. Install gasket and re-connect motor connector to
handle harness connector.
8. Push rear cover assembly into handle and
tighten cartridge.
9. Install fan air valve cartridge.
Air Valve Remove/Replace
1. Remove trigger.
2. Remove rear cover assembly.
3. Remove air valve and spring.
10. Tighten cover screw.
6. Install fluid valve cartridge.
4. Remove air valve packing nut and packing.
NOTE
NOTE
The gasket between the handle and rear cover is reu-
seable. It should not be replaced unless torn or damaged.
AH-17-02-R1 (10/2019)
35 / 55
www.carlisleft.com
MAINTENANCE
EN
