Motor Removal
1. Remove light pipe.
2. Remove screw and retainer.
3.
Remove motor assembly by pulling
out on 3 arms, pull motor out.
4. Remove porting block.
5. Remove fluid valve cartridge O-ring.
NOTE
4. Disconnect motor connector from handle wire
harness connector.
NOTE
NOTE
Block must be pulled out with fingers rocking the
part side to side while pulling.
Only remove fluid valve cartridge if parts are
being changed.
AH-17-02-R1 (10/2019)
33 / 55
www.carlisleft.com
MAINTENANCE
EN
