5. Insert air valve and spring.
6. Tighten packing nut till light drag is felt on the shaft while
moving it back and forth.
7. Install rear cover assembly.
8. Install trigger.
Fluid Bracket Removal
1. Loosen fluid nut.
2. Remove air fitting.
4. Install o-ring, gasket and bracket.
5. Install air fitting.
3. Remove bracket, gasket and o-ring.
NOTE
NOTE
The gasket between the handle and bracket is reuse-
able. It should not be replaced unless torn or damaged.
AH-17-02-R1 (10/2019)
36 / 55
www.carlisleft.com
MAINTENANCE
EN
